This flagstone is irregularly shaped, 2" to 3" thick, smooth surfaced stone with variegated swirls of color. Pallets contain stone that vary in size from a dinner plate size to the size of a garbage can lid and everything in between. Mostly used in lieu of thinner flagstone to provide a little bit stronger load-bearing surface.

- TOP -

This flagstone is irregularly shaped, 1 1/2" plus or minus 1/2" thick. It has a smooth surface with variegated swirls of color. Pallets contain stone that vary in size from a dinner plate size to the size of a garbage can lid and everything in between. Most commonly used for patios and walkways either with or without a bed of mortar. It is also used as coping around ponds. If you plan to use it for a patio you will need about 16 to 18 lbs per square foot of patio.

 

- TOP -

This flagstone is irregularly shaped, 1" or under in thickness, smooth surfaced stone with variegated swirls of color. Pallets contain stone that vary in size from dinner plate size to the size of a garbage can lid and everything in between. Most commonly used for mortaring onto concrete block as a veneer. It is also used as coping around small ponds. It is generally not suitable for walking on because it is so thin.

 

- TOP -

This flagstone is irregularly shaped, available in several thicknesses, smooth surfaced stone with variegated swirls of color. Pallets contain stone that vary in size from a pizza slice size to dinner plate size. Most commonly used for stacking walls with or without mortar, and as a veneer with the pieces mortared to masonry block.


 

- TOP -

Comes from flagstone slabs that are 2 ½" to 6" thick that are broken into 4" widths and varying lengths. They are very nice for stacking walls or as edging around patios or plant beds.
 

- TOP -

Produced from flagstone slabs that are broken into rectangular brick-like sizes and then tumbled in a machine to smooth the edges. The product is excellent for stacking walls or as edging around patios or plant beds.

 

- TOP -

This product is basically stacking flagstone that is tumbled in a machine to smooth the edges. The product is excellent for stacking a wall or making small scale patios and walkways.
 

- TOP -

This 1 1/2" to 2" thick flagstone is cut by a breaker machine into squares and rectangles, but not necessarily in perfect 90-degree angles. This stone is traditionally used in walls and may also be used as a paving stone for paths or walkways..
 

- TOP -

Same description and use as cut Ashlar except it is tumbled to soften and round the edges to produce an old cobblestone look.
 

- TOP -

Flagstone stair treads are cut on a stone breaker from large slabs. The treads range from 2 1/2 feet to 3 feet in length and 18" wide. The riser dimensions vary slightly from 5" to 6". Each slab weighs from 280-310 lbs. so you will probably need to use a little Egyptian technology to set these stairs in place. As a rule we do not deliver this product due to the risk of damaging them while dumping.

- TOP -

Step stones are cut from 1 1/2" to 2" thick flagstone slabs into squares and rectangles (not necessarily exact 90 degree angles). Step stones are available in various colors and sizes in 12", 18" and 24" lengths and widths. These stones can be laid in the ground to create single steps or patterned together to make patios. Many people use them as capstones for stacked walls.

- TOP -

Our stone benches are sold as a 3 piece set (2 legs and a seat). It is cut from 3" stock with the bench being 15" wide and 36" to 38" long. The edges are hand chiseled (pitched) to provide a finished, rounded appearance. Ask us how to install these - we'll be happy to ensure you know how to do it properly.

- TOP -